INCH-POUND
MIL-DTL-38195D
01 Apr 2000
SUPERSEDING
MIL-G-38195C
10 Jul 1978
DETAIL SPECIFICATION
GENERATOR SET, GAS TURBINE ENGINE, 60 kW
400 Hz, GENERAL PURPOSE
MIL-DTL-38195D remains inactive for new design and is no longer used, except for replacement purposes.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 This specification covers general requirements for a general purpose, tactical generator set (herein after
termed "set"), rated to 60 Kilowatts (kW) direct current (DC) and 60 kW at 400-Hertz (Hz) alternating current (AC).
The set will include a wheel-mounted, towable, gas turbine engine-driven, Model MEP-356A (Air Force Model
A/M32A-60A).
1.2 Classification. The generator set will have the rated outputs of the type and description as specified:
CLASSIFICATION
TYPE
DESCRIPTION
Type I
Pneumatic power (bleed air)
147 pounds per minute (lbs/min) at 48 pounds
per square inch (psi)
3 phase, 4-wire, 120 Volt (V) line-to-neutral and
Type II
AC
208 V line-to-line (120/208 V), 60 kW, 0.8
power factor (PF) (lagging)
Type III
DC
200 Amperes (A) at 28 Volts
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: WR-ALC/TILCC, 420 Second Street Suite 100, Robins AFB, GA
31098-1640 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of
this document or by letter.
AMSC N/A
FSC 6115
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business