MIL-DTL-38195D
ANSI S1.11
Octave-Band and Fractional-Octave-Band Analog and Digital Filters,
Specification for
ANSI S1.13
Sound Pressure Levels, Methods for Measurement of
(Applications for copies may be addressed to the American National Standards Institute, 11 West 42nd Street, New
York, NY 10036, phone (212) 642-4900 or FAX (212) 398-0023)
AMERICAN SOCIETY for TESTING and MATERIALS (ASTM)
ASTM D910
Gasolines, Aviation
(Applications for copies may be addressed to the American Society for Testing and Materials, 100 Bar Harbor
Drive, West Conshohocken, PA 19428-2959, phone (610) 832-9500 or FAX (610) 832-9555)
AMERICAN SOCIETY of MECHANICAL ENGINEERS (ASME)
ASME PTC 19.5
Application, Part II of Fluid Meters: Interim Supplement on Instruments and
Apparatus
(Applications for copies may be addressed to the American Society of Mechanical Engineers, 345 E. 47th Street,
New York, NY 10017, phone (212) 705-7722 or FAX (212) 705-7739)
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA MG1
Motors and Generators
(Applications for copies may be addressed to the National Electrical Manufacturers Association, 1300 North 17th
Street Suite 1847, Rosslyn VA 22209, phone (703) 841-3200 or FAX (703) 841-3300)
SOCIETY OF AUTOMOTIVE ENGINEERS
SAE AS-8090
Equipment, Towed Aerospace Ground, Mobility
(Applications for copies may be addressed to the Society of Automotive Engineers, 400 Commonwealth Drive,
Warrendale, PA 15096-0001, phone (412) 776-4841 or FAX: (412) 776-4026)
2.4 Order of Precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related associated specifications, specification sheets, or MS standards), the text of this document
takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), two generator sets shall be subjected to first article inspection (see
6.3.14 and 6.4) in accordance with (IAW) 4.3.
3.2 Materials. The contractor shall select the materials, but the materials shall be capable of meeting all of the
operational and environmental requirements specified herein. (The materials previously specified in MIL-STD-970
are recommended, but are not mandatory.) Recovered materials shall be used to the maximum extent possible.
3.3 Design and construction. The design and construction of the set shall promote ease of use, ease of
maintenance, and maximum reliability and maintainability (see 4.5.2 and 4.6.8).
3.3.1 Reliability. The set shall have a reliability of 425 hours meantime between failures (MTBF) (see 4.5.2 and
4.6.9).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business