MIL-DTL-6162C
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index for Specifications and Standards (DODISS) and
supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
FEDERAL
QQ-P-416
Plating, Cadmium (Electrodeposited)
DEPARTMENT OF DEFENSE
MIL-S-5002
Surface Treatments and Inorganic Coatings for Metal Surfaces of Weapon
Systems
MIL-C-5541
Chemical Conversion Coatings on Aluminum and Aluminum Alloys
MIL-A-8625
Anodic Coatings for Aluminum and Aluminum Alloys
MIL-S-8879
Screw Threads, Controlled Radius Root with Increased Minor Diameter,
General Specification for
MIL-PRF-23699
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code
Number O-156
MIL-R-23761
Regulator, Voltage, and Control Panels Aircraft, Direct Current Generator,
General Specification for
Nut, Self-Locking, 250° F, 450° F, and 800° F
MIL-DTL-25027
MIL-PRF-81322
Grease, Aircraft, General Purpose, Wide Temperature Range
STANDARDS
FEDERAL
FED-STD-595
Colors Used in Government Procurement
DEPARTMENT OF DEFENSE
MIL-STD-100
Engineering Drawings
MIL-STD-130
Identification Marking of U.S. Military Property
MIL-STD-461
Requirements for the Control of Electromagnetic Interference Characteristics,
of Subsystems and Equipment
MIL-STD-704
Aircraft Electric Power Characteristics
MIL-STD-810
Environmental Engineering Considerations and Laboratory Tests
MIL-STD-889
Dissimilar Metals
MIL-STD-973
Configuration Management
MIL-STD-2175
Castings, Classification and Inspection of
NASMS33540
Safety Wiring and Cotter Pinning
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business