MIL-DTL-6162C
HANDBOOKS
DEPARTMENT OF DEFENSE
MIL-HDBK-454
General Guidelines for Electronic Equipment
MIL-HDBK-781
Reliability Test Methods, Plans, and Environments for Engineering,
Development Qualification, and Production, Handbook for
(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the
Defense Automated Printing Service (DAPS), 700 Robbins Ave, Building 4D, Philadelphia, PA 19111-5094, phone
(215) 697-2197 or DSN 442-5164.)
2.3 Non-Government publications. The following document forms a part of this document to the extent
specified herein. Unless otherwise specified, the issues of the documents, which are DOD adopted, are those listed
in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in
the DODISS are the issues of the documents cited in the solicitation (see 6.2).
SOCIETY OF AUTOMOTIVE ENGINEERS
SAE AS-1933
Hose Containing AGE-Sensitive Elastomeric Material, Age Controls for
SAE AMS-M-3171
Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on
(Applications for copies may be addressed to the Society of Automotive Engineers, 400 Commonwealth Drive,
Warrendale, PA 15096-0001, phone (412) 776-4841 or FAX: (412) 776-4026)
2.4 Order of Precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related associated specifications, specification sheets, or MS standards), the text of this document
takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with
the applicable specification sheet. In the event of any conflict between the requirements of this specification and the
specification sheet, the latter shall govern.
3.2 Qualification. Generators or starter-generators furnished under this specification shall be products that are
authorized by the qualifying activity for listing on the applicable qualified products list (QPL) before contract award
(see 4.2 and 6.3).
3.3 Selection of specifications, standards, and materials. Specifications and standards for all materials, parts,
and Government certification and approval of processes and equipment which are not specifically designated herein
and which are necessary for the execution of this specification shall be selected in accordance with current industry
practices, except as provided in paragraph 3.4.1.
3.3.1 Standard parts. Military Standard parts shall be used wherever they are suitable for the purpose, and shall
be identified on the specification sheets or other applicable documents by their military part number (see 4.6.1). Any
standard part, of the same part number, shall be interchangeable as applied within the machine. Commercial utility
parts such as screws, bolts, nuts, cotter pins, etc., may be used provided they possess suitable properties and are
replaceable by the standard parts (MS and AN) without alteration and provided the corresponding standard part
numbers are referenced in the parts list and on the contractor's specification sheets. In the event there is no suitable
corresponding standard part in effect on date of invitation for bids, commercial parts may be used provided they
conform to all requirements of this specification.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business