MIL-P-53132(ME)
(Application for copies should be addressed to: AMERCN WELD SCTY, 550 NW LEJEUNE RD, PO BOX 351040, MIAMI FL 33135.)
ASSOCIATION OF AMERICAN RAILROADS (AAR)
Section 6 - Rules Governing the Loading of Department of Defense
Materiel on the Open Top Cars.
(Application for copies should be addressed to: ASS OF AMERCN RR, 50 F STRET NW, WASHINGTON DC 20001.)
(Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other information services.)
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein (except for associated specification sheets), the text of this document shall take precedence. Nothing in this document, however, shall supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Description. The power plants shall consist of two generator sets, one or more modified military standard trailers, a power plant switchbox, and other devices required to achieve a complete power plant assembly. The power unit shall consist of a generator set, modified military standard trailer, and other devices required to achieve a complete power unit assembly.
3.1.1 Detail requirements for individual power plant/power unit size and mode. The individual power plant/power unit requirements shall be as specified herein
(see 6.2) and in accordance with the applicable specification sheets. In the event of any conflict between the requirements of this document and the detail specification sheet, the latter shall govern.
3.1.2 Drawings. The drawings forming a part of this document are as listed on the applicable military specification sheet end product drawings. No deviation from the prescribed drawing requirements is permissible without prior approval of the contracting officer. Any data (e.g. shop drawings, layouts, flow sheets, processing procedures, etc.) prepared by the contractor or obtained from a vendor to support fabrication and manufacture of the production item shall be made available, upon request, for inspection by the contracting officer or the designated representative.
3.1.2.1 Safety. Any proposed changes, deviations, and waivers to the drawings shall conform with the following requirements: All rotating or reciprocating parts and other parts subject to high operational temperatures that are of such a nature or are so located as to be a hazard to operating personnel, shall be guarded or insulated to the extent necessary to eliminate the hazard. Electrical equipment shall be effectively guarded and grounded to protect all persons and objects from electrical shock hazard.
3.2 First article. Unless otherwise specified (see 6.2), two each power
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business