MIL-P-53132(ME)
unit, as
required in each
specification sheet, is a wet weight and includes the
weight of the
fuel, lubricating
oil, electrolyte, coolant and hydraulic oil at
full capacities and the ancillary
equipment. The wet weight does not include any
packaging that
may come with the
power plant, generator set or power unit.
6.4.3 User equipment allowance. See specification sheet.
6.4.4 Maximum weight (see specification sheets). The maximum weight includes the operational weight plus a user equipment allowance. Maximum weights are
listed on the
specification
sheets.
6.4.5 Towing vehicle. See vehicles.
specification sheets for recommended towing
6.5
Government-furnished property. The contracting officer should arrange to
furnish the
property specified
(see 3.4 and appropriate slash sheet).
6.6
Registration numbers. The
contracting officer should arrange to furnish a
list of registration numbers to be applied to the power plant/power unit.
6.7 First article pack. Any
changes or deviations of production packs from the
approved first
article pack will
be subject to the approval of the contracting
officer.
Approval of the first article pack will not relieve the contractor of
obligations to
preserve, pack and
mark the power plant/power unit in accordance
with this
specification.
6.8
Depreservation Guide. The
requirement for a depreservation guide should be
considered when this specification is applied on a contract. If the guide is
required it
must be prepared on DA Form 2258 "Depreservation Guide for Vehicles
and Equipment". The contracting
officer should arrange to furnish the record
copies of DA
guide must be
Form 2258, when acquired under
requested by the contractor. The depreservation separate contract line item and listed on the
Contract Data
Requirements List
(DD Form 1423) in the contract.
6.9
Consideration of data requirements. The following data requirements should
be considered
when this
specification is applied on a contract. The applicable
Data Item
Descriptions (DIDs)
should be reviewed in conjunction with the specific
acquisition to
ensure that only
essential data are requested/provided and that the
DIDs are
tailored to reflect the
requirements of the specific acquisition. To
ensure correct
contractual
application of the data requirements, a Contract Data
Requirements
Form 1423.
Reference
List (DD FAR
Supplement 27.475-1) exempts the requirement for a DD
Paragraph |
DID Number |
DID Title |
|
a. |
3.10 |
DI-MISC-80875 |
Welding Procedures |
b. |
3.10 |
DI-MISC-80876 |
Welding Procedure Qualification Test Report |
c. |
3.9 |
DI-PACK-80880 |
Transportability Report |
d. |
4.3 |
DI-T-4901 |
First article Inspection Report |
19
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business